Modular Frame Structures

Features

• Strongest design available in enclosures
• Perfect Strength to Weight ratio
• Better ingress Protection (Up to IP - 55)
• Multi color Powder coating is possible.

• Modular frame structure: Made of 3.00 thk folded CRCA sheet with vertical and horizontal (depth wise) indexing holes dia 9 & dia 4.2 in 12.5mm pitch.
• Base: Made in 3.00 thk folded sheet with removable front and rear covers in 2.00 thk. Base cover can be slotted for ventilation from bottom (if required).
• Door: Front & rear single door / split doors / partial doors in 2.00 thk CRCA sheet. With support channels, sheet metal special hinges, 3/4 point handle lock.
• Cover: Front fixed bolted cover in 2.00 thk for instrumentation panels in place of door. When door not necessary at rear screwed cover in 1.5 thk.
• Bottom gland plates: In varying combination in 2.00 thk folded CRCA sheet. Slotted or perforated bottom covers in 1.5 thk (for ventilation from bottom if required).
• Side Cover: Screwed side covers in 1.5 thk CRCA sheet
• Top cover: In 1.5 thk CRCA bolted in lifting eye bolts itself.
• Component mounting plate
• In 2.00/3.00 as per requirement.
• Size (Width -100) x (Height - 100) with depth wise adjustable mounting in 25 pitch.
• Partial component mounting plates in any size within maximum size range.
• Inter panel separator: Made in 1.5 thk when two or more enclosures joined together.
• Lifting eye bolts: Hooks are used for normal weight and heavy duty angles for bigger enclosures.
• 19'' Rack: DIN standard 19" equipments mounting arrangement is possible.
• 19"Swing frames: Suitable for 19" mounting in width and height as per requirement.

• Upto 1000mm width single door Can be Provide above 1000mm Split doors are recommended.
• Upto 1200mm width single welded structure Can be Provide & for widh above 1000 mm two separate structures or twin welded together structure is recommended.